DIXON VALVE
DIXON VALVE 4DS4-S D-Series Pneumatic Automatic Standard Hose Barb Coupler
* Imágenes referenciales
 
DIXON VALVE
D-SERIES PNEUMATIC AUTOMATIC STANDARD HOSE BARB COUPLER
SKU :  22578 MARCA : DIXON VALVE MODELO :  4DS4-S
Specifications:
Rated pressure for connected 303 Stainless Steel Coupler & 303 Stainless Steel Plug: 500 PSI (35 bar) Maximum Working and 20,500 PSI (1,415 bar) Burst

Construction:
Machined components are manufactured using solid bar stock.
Stainless steel balls, retaining rings and springs maximize corrosion resistance and extend service life.
Nitrile (Buna-N) seals are standard
Steel componentry is plated using ROHS Compliant Trivalent Chrome.
Steel prong valve

Compatibility & Interchange Data:
Foster 3, 4, 5 and 6 Series
Parker 30- Series Automatic Interchange
Hansen 3000, 4000, 5000 and 6000

How it works:
To disconnect, begin by holding the hose on the nipple side with three of your fingers, leaving your thumb and index finger free.
Grab the sleeve with your thumb and index finger and begin to pull the sleeve towards the palm of your hand.
After pulling the sleeve, the nipple will move out of the coupler slightly. Continue to hold the hose and coupler sleeve until all air is fully exhausted.
After the line is fully exhausted, you are able to safely separate the nipple from the coupler.

Safety notes:
It is important to be safe when installing quick disconnect couplings into a pneumatic circuit. Never install a pneumatic coupling directly into an air tool, use a piece of hose that is at least 18" long, between the tool and the coupling, to prevent damage to the coupling. To protect the operator, safety devices, such as a safety check valve and safety cable should be installed in case there is a hose or coupling failure.
Operating pressure for couplings utilizing hose barb connections may be dramatically reduced to that of the hose rating and/or hose end connection combination. Consult hose manufacturer's catalog for hose end connection ratings. If in doubt, test under controlled conditions for suitability to application.
Dixon cannot assume liability for misapplication of production resulting in equipment down-time, lost production, and/or personal injury including death.
WARNING: Cancer and Reproductive Harm- www.P65Warnings.ca.gov
PDF
ESPECIFICACIONES TÉCNICAS
1Body Size1/2"
2Factory Part Number4DS4-S
3Hex1-1/16"
4Hose ID1/2"
5Length3.51" (89.2mm)
6Material303 Stainless Steel
7Maximum OD1.34" (34.0mm)
8Pressure RatingSee Product Details
9Temperature Range-40°F to +250°F (-40°C to +121°C)
10Weight Lb0.4800
** Algunas características pueden variar sin previo aviso, venta sujeta a stock disponible
RECOMENDAMOS TAMBIÉN EN FITTINGS NEUMÁTICOS
NUESTRAS SUCURSALES
BOLETÍN INFORMATIVO
 
KMX USA
Email: sales@kmxusa.us
Horario: Lunes a Viernes de 9:00 AM a 5:30 PM
Dirección: 2645 Executive Park Drive,
Weston, Fort Lauderdale, FL 33331, EEUU.
www.kmxusa.us
 
KMX CHILE
Email: ventas@kmx.cl
Teléfonos: +56 2320 91342 +56 9445 42001
Horario: Lunes a Martes de 8:30 a 18:00 hrs
y Miércoles a Viernes de 8:30 a 17:00 hrs
Dirección: Monseñor Valech 12.050, B-11.
Maipú. Santiago, Chile
www.kmx.cl
Recibe nuestras ofertas y novedades en tu email
Al enviar, confirmo que, acepto recibir correos electrónicos de marketing y/o promocionales de KMX